Roofs Built for Decades of Weather
Composition roofing in Lufkin for properties with older shingle systems showing granule loss or water intrusion
Many homes in East Texas were built during the 1970s and 1980s when three-tab asphalt shingles were standard, and those roofs are now at the end of their service life. R&M Painting and Construction Services installs and replaces composition roofing in Lufkin for homeowners dealing with visible wear, missing shingles, or leaks that signal structural vulnerability. You'll see granules collecting in gutters, exposed mat backing on shingle surfaces, or curling edges that no longer seal against wind-driven rain.
Composition shingle replacement involves removing the existing roof down to the decking, inspecting and repairing any compromised sheathing, installing a quality underlayment, and applying new architectural or three-tab shingles with corrosion-resistant fasteners. The work sequence depends on what the decking inspection reveals—older homes often have spaced board sheathing rather than plywood, which requires different fastening patterns and sometimes a solid substrate upgrade before new shingles go down.
Schedule a roof inspection to identify sheathing condition and granule loss patterns before leaks reach interior framing.
What Proper Composition Shingle Installation Requires
The underlayment layer determines how well a roof manages water that gets past the shingles, which happens during heavy rain when wind pushes water upward under the tabs. A synthetic underlayment bonds to the decking and creates a secondary barrier that channels water toward the drip edge rather than allowing it to soak into the sheathing. Fastener placement follows the manufacturer's nailing pattern—too high and the shingle tabs lift in wind, too low and the fastener penetrates the waterproof seal zone.
Once the new roof is complete, you'll notice that water sheets off the surface rather than pooling in depressions, wind no longer lifts shingle edges during storms, and attic temperatures drop because the reflective granules deflect solar heat instead of allowing it to conduct through worn-out mats. Valleys handle concentrated water flow without backup, and flashing around chimneys and vent pipes sits flat against the surface with a sealed perimeter.
Composition shingle systems include the starter course along the eaves, which prevents the first row of shingles from lifting, and the ridge cap shingles, which are thicker and pre-bent to shed water down both roof planes. Ventilation requirements depend on attic design—most homes need a combination of soffit intake vents and ridge or gable exhaust vents to prevent heat and moisture buildup that shortens shingle life from the underside.
Questions Before Starting Your Project
Homeowners preparing for composition roofing work often ask about the process, materials, and what to expect during installation. These answers focus on how the work is performed and what you'll see once it's finished.
How is the existing roof removed without damaging the structure?
Crews use flat bars and roofing shovels to lift shingles and fasteners in sections, working downward from the ridge to prevent tearing the underlayment prematurely. The decking is inspected as each section is cleared, and damaged boards are marked for replacement before new underlayment goes down.
What determines whether architectural or three-tab shingles are used?
Architectural shingles have a thicker profile and multiple mat layers, which makes them more wind-resistant and longer-lasting, but they cost more per square and add weight to the roof structure. Three-tab shingles are lighter and less expensive but have a shorter warranty period and a flatter appearance.
How does the roof handle water around chimneys and skylights after installation?
Step flashing is woven between shingle courses along the vertical surfaces, and counter flashing is embedded into mortar joints or sealed against siding to create a two-layer barrier. Each piece overlaps the one below it so water flows downward without finding a gap.
What should you check once the roof replacement is finished?
Walk the perimeter and confirm that all debris is removed from gutters and landscaping, shingles are aligned in straight rows without gaps, and flashing sits flat without lifted edges. Inside the attic, check for daylight visible through the decking or new water stains that indicate a fastener missed a rafter.
How long does a composition shingle roof last in Lufkin's climate?
Most architectural shingles carry a 30- to 50-year warranty, but actual lifespan depends on attic ventilation, roof pitch, and whether the shingles receive afternoon sun exposure that accelerates granule loss. Proper installation and ventilation typically deliver 25 to 35 years of service before replacement is needed.
R&M Painting and Construction Services also installs composition roofing in Gilmer and Longview. Composition roofing work in older East Texas neighborhoods often requires coordinating with occupied homes where attic access is limited and exterior landscaping needs protection during tear-off—request a site evaluation to review access points and material staging requirements specific to your property.
